Premier Clean SC77

Premier Clean SC77

The dual purpose system kit that gets the job done

The Premier Clean is a multi-purpose system that acts as both a wallpaper stripper and steam cleaning solution. This system will get both DIY and cleaning tasks completed with minimal effort and repeatable results.

The unit comes with 9 handy attachments and its lightweight body can hold 5 litres of water, much more than standard steam cleaners, with up to 77 minutes usage time from just one fill. It only uses water so it’s cost effective to run and can be filled simply from the tap with a quick to unscrew filler on the top.

The Premier Clean has a 2kw heating element inside the container that heats the water until the point of steam. The large wallpaper plate attachment is translucent in colour making it easier to see the designated surface you are applying it to. It also allows you to see any collected condensed water when working overhead. The steam applied is absorbed by the paper and heats and hydrates the old wallpaper paste beneath it; this releases the paper from the wall for hassle-free removal.

The other attachments allow the system to help with all sorts of deep cleaning and disinfecting jobs without the use of chemicals or abrasive materials. These include; grease removal from hobs and BBQ’s, lime scale removal around taps and plugs, deodorising fabrics, mopping floors, cleaning tiles and grouting, stain removal, disinfecting surfaces and killing bacteria, dust mites and mould. This system is also perfect for killing weeds in the garden in flower beds and patio’s.

Minimal skill required, this system is the on-hand, eco-friendly solution.


Premier Clean SC77

Premier Clean Features

amazon toolbank  leerpng  leerpng

sc77-ac309-fc-manual Premier Clean SC77_manual


G29 09/05.qxd Premier Clean SC77_product sheet


Q. Can I put any wallpaper stripping additives in my unit?
A. Although some of these additives are designed for wallpaper strippers they are not recommended for ours, as they can damage internal components.

Q. How do I remove stubborn paper?
A. Score the paper either with a knife or perforating tool then use steamer as normal.

Q. Can’t I just hold the plate on for longer?
A. Do not hold it in the same spot for more than 10 seconds, as there is a risk it will burst the plaster underneath.

Q. How close can I get to light switches with the plate?
A. Do not allow water or steam to enter light switches or power points. Isolate the power at the main fuse box and then remove the face plate. This will allow you to remove any old paper that is stuck behind the socket/switch by hand with a damp sponge. Replace face plate when finished.

Q. Is it safe to remove Artex?
A. Normally Artex can be removed using the same method for wallpaper although the steam time will be longer. CAUTION: Some textured finishes may contain asbestos which may be hazardous to health and which are subject to licensing controls operated by the HSE (Health and Safety Executive).

Q. How about ceilings?
A. Always wear appropriate PPE (Personal Protection Equipment) when using any Earlex appliance. We recommend that you will need eye and hand protection due to possible hot water discharge from condensing steam.