Q. What are the filtration levels?
A. The standard fit yellow cellulose filters are 107 microns.
A. The white polyester filters are 15 microns.
Q. Dust is coming out from the blower hole.
A. The filters are clogged and require replacing.
A. They are damaged and require replacing.
A. The dust is to fine for the filters. Use collection bags WDACC19R.
A. The foam/paper filters are not fitted securely.
1. Slide foam filter over float cage ensuring all vents are covered and
there is a 10mm gap before the base of the motor housing.
2. Slide paper filter gently all the way over the top of the foam filter
and onto the shoulder of the motor housing.
3. Seal the top of paper filter with the elastic band so the band pulls
into the gap.
Note: it is important that the paper filter is completely enclosing the
foam otherwise dust will escape through.
Q. Can it be used for ponds and drains?
A. Yes and we recommend fitting the heavy duty WD filter WDACC13.
Q. What is the tech spec of these vacs as the catalogues conflict with
each other?
A. Specification: 230v, Air flow 33Ltr/sec, 1100W motor, Capacity 12ltr wet,
13.5ltr dry.
WD1000 - Hose length 1.8m, Working length 6M, paper filter
WD1200P - Hose length 4m, Working length 9m, cartridge filter, MIN PTO
Approx 75watts Max PTO 1800W.
Ensure filters are fitted at all times.
Empty after every use and check paper filter for damage. Always
replace the filter if damaged.
Remember to use the combined wet & dry filter for wet pick up.
After wet pick up always remember to empty, rinse and dry the
recovery tank, hose and accessories. If sticky spills, clean the tank and
accessories with warm, soapy water.